Murata recommends a symmetrical PCB layout with a solid ground plane, and keeping the input and output traces as short as possible to minimize parasitic inductance and capacitance.
Murata recommends following the derating guidelines in the datasheet, using a heat sink or thermal pad, and ensuring good airflow around the converter to prevent overheating.
Murata recommends using capacitors with a maximum value of 10uF for the input filter and 22uF for the output filter to prevent oscillation and ensure stability.
Yes, but Murata recommends following specific guidelines for synchronization and current sharing to ensure reliable operation and prevent damage to the converters.
Murata recommends checking the input voltage, output load, and PCB layout, and using oscilloscopes or other diagnostic tools to identify the root cause of the issue.
