The recommended torque for the screw terminals is 0.5-1.5 Nm (4.4-13.3 in-lbs). It's essential to follow this torque specification to ensure reliable connections and prevent damage to the connector.
Yes, the 2092080003 connector is designed to withstand vibrations and can be used in applications with moderate to high vibration levels. However, it's essential to ensure proper mounting and secure the connector to prevent damage or disconnection.
The 2092080003 connector has a IP67 rating, which means it's protected against dust and water ingress. However, it's not designed for extreme outdoor or harsh environment applications. If you need a connector for such applications, consider using a connector with a higher IP rating or additional protection measures.
While the datasheet specifies AWG 20-24 wire sizes, it's possible to use this connector with other wire sizes. However, you'll need to ensure the wire size is compatible with the connector's terminal design and that the wire insulation is not damaged during insertion. Consult with Molex or a qualified engineer for guidance on using alternative wire sizes.
Yes, to ensure reliable connections and prevent damage to the connector or PCB, follow these layout considerations: maintain a minimum clearance of 1.5 mm between the connector and nearby components, use a solder mask to prevent solder bridging, and ensure the PCB material can withstand the connector's operating temperature range.
2092080003 datasheet
by Molex
